SS0300/1300
Designed for deep vertical tillage, the Great Plains Inline Sub-Soiler shatters yield-robbing compaction layers created by horizontal tillage tools such as plows, disks, and sweep implements. With a working depth of 12″ to 16″ (30cm – 40cm), this autumn tillage tool resets the soil profile and maintains uniform soil density with minimal topsoil disturbance and no residue burial.
The Sub-Soiler’s frame features high-tensile, 3/8″ (9.53mm) wall tubing for added strength and durability. The SS0300 is available in 3, 5 or 6 shank with spacing of 75cm, 68cm or 54cm. The ¾” (19mm) no-till shank and no-till point provide maximum shatter with minimum surface disturbance. To achieve the full benefits of vertical tillage, it is important to select a point design that promotes horizontal fracture without blowout. The Sub-Soiler is offered with several different point options to fit a variety of conditions and needs.
Features
NO-TILL POINT
A no-till point that is approximately 10″ (25cm) wide is used with the ¾” (19mm) no-till shank. The no-till point minimises surface disturbance and maximises soil-structure-shatter below the surface. It also increases the amount of exposed surface residue and buries very little trash.
BERM CONDITIONERS
With 1″ (2.5cm) solid rods, the 16″ diameter (41cm) berm conditioners mounted to each shank help provide a level surface, enabling single-pass seedbed preparation. These are standard equipment.
ADJUSTABLE GAUGE WHEEL
A screw jack makes adjusting the gauge wheels simple and easy.
SHANK
The 3/4″ (19cm) no-till shank in most soil conditions, only leaves a shank slot exposed on the soil surface and shows a gentle uplifting of the earth between shanks. Therefore, it should be used where less ground disturbance is desired. Replaceable wear shins are standard.
AUTO-RESET
With 3000 lb. (1360kg) trip force, the Auto-Reset Shanks provide stop-free operation in areas where sub-surface obstructions exist.
Sub-Soiler Hitch
The Great Plains Sub-Soiler Hitch is quite capable as a tough 3-point pull package. The SSH can turn your 3-point sub-soiler, no-till drill, or other 3-point implement into pull-type machines – no longer requiring the normal hassle of hooking and unhooking to the tractor’s 3-point hitch. The rugged design allows it to handle equipment up to 15,000 (6803kg) pounds. Optional 300-gallon (1135L) fertilizer tank is available.
Gallery
ENQUIRE ABOUT THIS PRODUCT
Specifications
| SS0300 | SS1300 | SS1800 | SSH (SubSoiler Hitch) | |
| Shank Spacing | 27.5", 29.5" (70cm, 75cm) | 24", 30" (61cm, 76cm) | 30", 36", 38", 40" (76, 91, 96, 101cm) | |
| Tractor Attachment | 3 Point Linakage | 3 Point Linakage | 3 Point Linakage | Drawbar |
| Tires | 20.5 x 8 10-ply (gauge wheels) | 20.5 x 8 10-ply (gauge wheels) | 20.5 x 8 10-ply (gauge wheels) | 12.5L x 15" |
| Weight (Approx. lb (kg) No-Till Shank - Auto-Reset | 2030 - 4300 lbs (921 - 1950kg) | 2,339 - 3,778 lbs ( 1061 - 1714kg) | 4,850 - 5,125 lbs (4850 - 5125kg) | 3040 (1379kg) |
| PTO H.P Req (Min) | 150+ | 150+ | 300+ | |
| Tillage Width | 6' 9" - 9' 9" (2.1m - 3.5m) | 7' 6" - 16' (2.3m - 3.01m) | 17" 6' - 20' (5.36m - 6.09m) | |
| Transport Width | 9' 10" (3m) | 11' 2" - 16' 5" (3.4 - 4.87m) | 12' 9" - 13' 1" (3.9m - 4m) | |
| Transport Height | ||||
| Length | 14' (4.27m) | |||
|
||||
| 2 Bar Frame of 4x6x3/8” wall tubing | ||||
| 2 Bar Frame of 4x6x3/8” wall tubing | ||||
| Tillage depth from 8” to 18” 20-46cm | ||||
| 39” (99cm) under frame shank clearance | ||||
| (2) 20.5 x 8 load range E 6 bolt gauge wheels | ||||
| Safety kit including SMV and lights | ||||
| Cat. 3 & 3N pin | ||||
| Extendable Main Frame | ||||
| Replaceable wear shins on no-till shanks | ||||
| Replaceable and reversible shins on 1 ¼” (3cm) shanks | ||||
| (2) shank mount options: rigid or auto reset | ||||
| Both rigid and auto reset are shear bolt protected | ||||
| Adjustable Gauge Wheel w/Jack | ||||
| (6) tip options (at additional charge) for (3cm) 1 ¼” Shank | ||||
| (1) tip option (at additional charge)for No-Till Shank | ||||
| Large cast strap hitch adjustable for differing hitch heights | ||||
| Lift range at quick hitch: 14” to 41” | ||||
| Dual 12.5L-15 F-load rated tires on 8-bolt wheels | ||||
| Adjustable dual centers of 19 7/8” or 24 ½” | ||||
| Gauge wheel centers are adjustable from 76” to 94” | ||||
| Re-phasing hydraulic cylinders on gauge wheels: 5”x16” – master, 4 3/4”x16” slave | ||||
| Heavy turnbuckle top link | ||||
| Transport lock channels | ||||
| Can be used with tillage or drills | ||||
| Light harness extension | ||||
| Spring hose bracket on strap hitch | ||||
| Quick hitch will accommodate Category II, IIIN, or III | ||||
| Safety chain | ||||
| Jack | ||||
| Depth Stop Kit (2) | ||||
|
||||
| (30) 75cm shank spacing option | SS0300-3 | SS1300-5 | SS1800-7 | |
| (52) 68cm shank spacing option | SSo300-5 | |||
| (24) 61cm shank spacing option | SS1300-8 | |||
| (50) 54cm shank spacing option | SS0300-6 | |||
| No Till Shank and Shin 2cm | ||||
| No Till Point | ||||
| Berm Conditioner for No Till | ||||
| (30) Category III Hitch Links | ||||
| (71) Cast Hitch Strap Category IV | ||||